Darkside™ Lap

The Affordable, High Performance Lap

The Darkside™ was created to address the rising metals prices and to create an affordable easy-to-charge and use lap. They immediately became popular with people who always had trouble charging a metal lap.

But there were surprises in store: The Darkside outperformed expectations and has been adopted by many professional production cutters. In particular, they are the "Magic bullet" for quartzes when used with Cerium, Zirconium, or Chromium Oxides.

Suppose we took the ease of a Corian-type lap, coupled with the speed of a composite lap, but reduced wearing and heating?

Now add polar and nonpolar domains to allow the use of the whole range of diamond and oxide polishes.

The lap quickly breaks in on the first stone, without the charging process needed for metal laps, making it user-friendly for beginners.

Darkside Lap Illustration

What a Darkside™ Lap Is

The DARKSIDE™ is a lightweight lap, made of the specially developed material coated onto a rigid baseplate, then machined both sides for flatness. For its thickness it is surprisingly rigid.

Because of the two-ply construction, these laps require twice the labor operations to manufacture, but it least it finally gets away from those horrible tin prices.

The Darkside™ is a RESURFACABLE LAP. Within reason, if a lap jam does not destroy the lap, you get another chance or two. If A stone fractures and chips embed, the Darkside can be resurfaced. Once production started, I increased the thicknesses of both the metal backing and the polymer composite layer to allow this, as well as to give the lap a stiffer "feel" and quiter running. I can resurface your Darkside, or any local machine shop can. Carbide tooling is required. Single point or PCD diamond is strongly suggested for best finish.

Darkside Lap Illustration

What a Darkside™ Lap Isn't

It is not an off-the-shelf commercial material. Like BATT™ and BA5T™, it was designed for this specific application, Made Here, and has no other readily apparant commercial uses.

It contains no reactive species, nor are its precursors listed carcinogens. (I want to survive making the stuff! Just as with my metal alloys, since I have to make and handle thousands of them, you can BET I watch toxicity issues! Any such issues will get me first.)

It is not a BATT™. It is designed for polishing, though it has been tested successfully with 3K as a prepolish, which it does quickly and aggressively. While I never designed the tin alloy BATT for cutting, people love cutting with it...but you will NOT be able to do this with the DARKSIDE™.

Darkside Lap Illustration

Why a Darkside™ Lap Works

Like all Gearloose laps, the polishing mechanism relies on surface complexity for polish retention, and lubricity for reduced heating and higher polishing efficiency.

Some users have gotten three pavilions done before needing to add more diamond. Because the composite contains carbon, it has a natural affinity for diamond, but the hydrophilic domains GREEDILY accept oxide polishes-Use them SPARINGLY.

Testimonials

" I haven't had time this week to try the Darkside myself so gave it to my best cutter yesterday to try. He isnt going to give it back, NO WAY ! Its a real good test as he is a bit old fashioned and set in his ways, he didnt even really want to try it but he is really pleased he did. He was cutting sapphire and used #60,000 Diamond- no problems getting it going, I think you are on a winner."

Commercial Dealer, AU

"Polish is done in about 1/3d the time it used to take. Why weren't you around 25 years ago when I got started and it would have saved me much frustration!"

Commercial Cutter

"Tried the new darkside lap. I give it a grade of super. Have polished cz, tourmaline and a demantoid garnet with a great and fast polish."

Faceting Instructor, US

"I let my partner try it, and he will not give it back. Can I have another?"

Commerical Cutter, US